To display the menu:
1. At the Normal screen, press ENT.
2. At the Password scree, press ENT four times.
NOTE: There is no preset password.
3. Use the Up/Down buttons to highlight the menu item, and press ENT to open.
5.1.3 Alarm Screens
The Alarm menu offers options to review current alarms, adjust alarm setpoints, and enable/disable alarm
functions, see Figure 5.3 on the next page.
To access alarm options:
1. At the main menu, use Up/Down buttons to select the Alarm menu, and press ENT.
2. Select the alarm-menu item, and press ENT. Table 5.1 on the next page, describes the alarm
options.
5 Using the Controller and Display
23
To Next Page
Loading...
Need help?
General