Verve CAM - Take Time Lapse Video (via Hubble Connect for VerveCam app)

17 Take Time Lapse Video (via Hubble Connect for VerveCam app)
en
14. Take Time Lapse Video (via Hubble
Connect for VerveCam app)
Note: The App will remember the last used mode
and will go to that mode automatically when
connected.
Time lapse photography is a way of filming
something in which many photographs are taken
over a long period of time and are shown quickly in a
series so that a slow action (such as sun rise, cloud
movements) appears to happen quickly.
Time lapse function is useful for nature photography
or for capturing busy scenes such as rush-hour traffic.
Time lapse video recording should be more than 5
minutes in duration.
This function can only be selected in Hubble
Connect for VerveCam app.
14.1 Set Time Lapse Video Interval
1. Run Hubble Connect for VerveCam app on
your smartphone.
2. In the viewfinder screen, tap to select
Time Lapse
mode on the bottom panel.
3. Tap to select an interval (1, 2, 3, 5, 10, 30, 60
seconds).
14.2 Set Time Lapse Video Resolution
1. Run Hubble Connect for VerveCam app on
your smartphone.
2. In the viewfinder screen, tap to select
Time Lapse
mode on the bottom panel.
3. Tap to select a video resolution (2560 x 1440,
1920 x 1080, 1280x 720).