Verve CAM - Record Time Lapse Video

Take Time Lapse Video (via Hubble Connect for VerveCam app) 18
en
14.3 Record Time Lapse Video
1. Run Hubble Connect for VerveCam app on
your smartphone.
2. In the viewfinder screen, tap to select
Time Lapse
mode on the bottom panel.
3. Tap again to start time lapse video
recording.
You will hear a beep sound. The blue LED
indicator and the white video mode indicator
flash when video recording is in progress.
4. To stop time lapse video recording, tap or
press the SHUTTER/SELECT button
on the
Camera.
The blue LED indicator and the white video
mode indicator stop flashing.
Note: Videos will be stored on the Camera’s
memory card.