Handlebars: Light alloy casting incorporat-
ing speedometer. All transmission cables
and various controls are enclosed.
Steering column, suspension: On the
lower end of the steering column is pivoted
the front wheel swinging hub: front and
rear suspensions with helical spring and
hydraulic damper.
Wheels: Interchangeable and made up of
10"dia. pressed steel flanges. fitted with 3.00 -
10" tyres.
Brakes: cable operated expanding type.
Front brake is operated by hand-lever
(R.H. handlebars); the rear brake is pedal
operated on R.H. footboard.
Parking stand: a two legged stand with a
central return spring.
Steering lock: the locking device operates
by mean of a sliding bar engaging in the
steering column.
STANDARD TOOL KIT
Wrenches: I box wrench (11-17-21 mm.);
2 single open-ended wrenches (7-8 mm.).
Screwdriver: I item.
These tools are contained in a canvas roll
together with this booklet which is placed
in a tool box located under the saddle.
- 35
To Next Page
Loading...
