EasyManuals Logo

Vespa LT 3V ie User Manual

Vespa LT 3V ie
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
also activated by switching off the engine with the RUN OFF switch. This happens
even if the starter key is in «ON».
When additional keys are required, please note that data storage (up to 3 keys max.)
must be done on all keys, both new ones and existing ones. Take your scooter to an
Authorised Piaggio Service Centre carrying with you the red-handgrip key and all
the blue keys in your possession. The codes of keys not submitted for the new pro-
gramming procedure are deleted from the memory. Any lost keys will therefore not be
enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF OWNERSHIP OF THE VEHICLE IS TRANSFERRED TO ANOTHER PERSON,
THE KEY WITH THE RED GRIP (AS WELL AS THE OTHER KEYS) AND THE
"CODE CARD" MUST BE ALSO TRANSFERRED TO THE NEW OWNER.
Procedure start-brown key
Insert the brown key into the ignition switch (in the «OFF» position), turning it to the
«ON» position. After 1 - 3 seconds, turn the key to «OFF » again and pull it out.
Intermediate step-blu key
After extracting the brown key, insert the blue key within 10 seconds and promptly turn
it to «ON». After 1-3 seconds, turn the key to «OFF» again and pull it out.
18
1 Vehicle

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vespa LT 3V ie and is the answer not in the manual?

Vespa LT 3V ie Specifications

General IconGeneral
BrandVespa
ModelLT 3V ie
CategoryScooter
LanguageEnglish

Related product manuals