03_38
CAUTION
DO NOT PULL THE ELECTRICAL WIRING TO EXTRACT THE BULB HOLDER.
Rear-view mirrors (03_39)
The mirrors can be set to the desired position by adjusting the mirror frame.
03_39
To remove the rear view mirror, lift the rubber protection, unscrew the lock nut «A»
slightly to unlock the stem. Unscrew the stem «B» until removing it.
CAUTION
DO NOT ADJUST THE MIRRORS WHILE RIDING. THIS COULD CAUSE YOU TO
LOOSE CONTROL OF THE VEHICLE.
68
To Next Page
Loading...
Need help?
General