1. How to Clean the Gun Casing
Wipe off the dirt on the gun with soft and dried cloth.
Use the vacuum cleaner to remove the dust stained around body.
Do not use solvent such as alcohol or thinner, or detergent on the casing.
2. How to Clean the Electrode Needle
When performing a cleaning of electrode needle, be sure to pull the power supply adaptor off
electric outlet.
Cleaning order:
1 .Remove the Nozzle.
2 .Clean the tip of the needle with cotton swab.
I
f it is heavily contaminated or dirty, use wet cloth with a few drops of alcohol.
3 .How to mount the Nozzle back.
Be sure that the Nozzle is fixed firmly.
If it is too tightly fastened, it may damage or break itself. If it is not firmly fixed, the Nozzle
may be popped out due to it is air blow power.
3. How to Replace the Electrode Needle
When replacing the electrode needle, use the screwdriver G-7DR (optional).
Pull off Power Supply Adapter first before the cleaning of electrode needle.
Replacement Order:
1 .Remove the Nozzle.
2 .Release the electrode needle by loosening the threads with the screwdriver G-7DR.
3 .Change it with new needle (G-NH) and fasten firmly with the same screwdriver.
4 .Place the Nozzle back.
Mount the Nozzle firmly. If it is too tightly fastened, it may damage or break itself.
If it is not firmly fixed, the Nozzle may be popped out due to it is air blow power.
To Next Page
Loading...