Safety Precautions
●Carefully read these Safety Precautions before use. Observe the precautions indicated herein to
ensure safety.
●Safety precautions in this instruction manual are categorized into two types by the degree of danger
associated with each on the followings. Based on danger analyses performed by Vessel, all
precautions in this instruction manual are of the CAUTION level.
●If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.
Indicates that improper handling can lead to serious injury or even death.
Indicates that improper handling can lead to minor injury and property damage.
This symbol indicates a WARNING or CAUTION.
This symbol indicates a prohibited action.
This symbol indicates a mandatory required action
Do not use the G2-E in environments that require explosion-proofing. The
G2-E is not of explosion-proof construction, therefore explosion or fire may
occur.
Do not use the G2-E in flammable atmospheres. The corona discharge
can act as an ignition source and cause an explosion or fire.
Do not use the G2-E in environments subjected to sharp temperature
fluctuations or dewing. This kind of environment can lead to breakdown.
Do not use the G2-E in highly damp places or anywhere it may be wet by
water, oil, solvent or other liquid. Contact with moisture can result in
electric shock or breakdown.
Do not use the G2-E for anything other than removal of static electricity or
dust.
Do not use the G2-E with power supplies of ratings not specified in the
specifications. Inappropriate power supplies can result in fire and electric
shock.
Do not install, use or service the G2-E until having understood the
information in this instruction manual.
Keep this instruction manual in a safe handy place for future reference.
Vessel assumes no responsibility whatsoever for consequences arising
from the use of this product.
To Next Page
Loading...