Vestal Guide User Manual

10
ALARM SETTING
The next four alarms (A2A, A3A, A4A, A5A) can be set for
specic dates if activated. Press and hold the Light button for 2
seconds to enter the setting mode.
- Month: Select using the Barometer/Altimeter buttons to
increase or decrease the month.
- Press Mode to advance.
- Day: select using the Barometer/Altimeter buttons to increase
or decrease the days.
- Hours: Select using the Barometer/Altimeter buttons to
increase or decrease the hours. *if in 12H mode, AM/PM will
be displayed to the left of the hours.
- Press Mode to advance
- Minutes: Select using the Barometer/Altitude buttons to
increase or decrease the minutes.
- Press Light to exit.
- To activate the alarm, press the Barometer button once to
activate (bell icon will appear), press it twice to deactivate. On
alarms A2A, A3A, A4A, A5A the SNZ feature is not available.
- Use the Altimeter button to advance to the next alarm A2A-
A3A - A4A - A5A
*Note: If you want an alarm to ring daily during a specic
month: set the month and leave the day blank “---“
*Note: If you want an alarm to ring on a specic day of the
month every month: leave the month blank “---“ but set the
day.

Vestal Guide Specifications

General

Brand	Vestal
Model	Guide
Category	Watch
Language	English