Vestal Guide User Manual

11
ALARM SETTING
The next four alarms (A2A, A3A, A4A, A5A) can be set for
specic dates if activated. Press and hold the Light button for 2
seconds to enter the setting mode.
- Month: Select using the Barometer/Altimeter buttons to
increase or decrease the month.
- Press Mode to advance.
- Day: select using the Barometer/Altimeter buttons to increase
or decrease the days.
- Hours: Select using the Barometer/Altimeter buttons to
increase or decrease the hours. *if in 12H mode, AM/PM will
be displayed to the left of the hours.
- Press Mode to advance
- Minutes: Select using the Barometer/Altitude buttons to
increase or decrease the minutes.
- Press Light to exit.
- To activate the alarm, press the Barometer button once to
activate (bell icon will appear), press it twice to deactivate. On
alarms A2A, A3A, A4A, A5A the SNZ feature is not available.
- Use the Altimeter button to advance to the next alarm A2A-
A3A - A4A - A5A
*Note: If you want an alarm to ring daily during a specic
month: set the month and leave the day blank “---“
*Note: If you want an alarm to ring on a specic day of the
month every month: leave the month blank “---“ but set the
day.
STOPWATCH
STOPWATCH can time up to 23 hours, 59 minutes, 59 sec-
onds. It can record up to 99 laps.
To use:
- Enter the STOPWATCH mode by pressing the Mode button
2 times
- Use the Barometer button to start and stop the timer.
- To record laps, press the Altimeter button while the timer is
running
- To access the lap data, stop the timer, press and hold the Light
button for 2 seconds. To view the lap data, use the Barometer
and Altimeter buttons to cycle through your recorded laps, up
to 99.
- Press and hold the Light button for 2 seconds to exit the lap
view mode.
- Press the Altimeter button to reset the stopwatch.

Vestal Guide Specifications

General

Brand	Vestal
Model	Guide
Category	Watch
Language	English