Need help?Do you have a question about the Vestal Guide and is the answer not in the manual?
Describes the premium multi-sensor digital movement, stainless steel case, K1 crystal, and 10 ATM water resistance.
Details the 48mm 316L stainless steel case, 22mm PU band, and stainless steel buckle.
Specifies K1 mineral crystal, digital movement with sensors, and 10 ATM water resistance.
Mentions altimeter, barometer, compass, thermometer, world time, stopwatch, countdown timer.
Press and hold to set the mode.
Accesses the COMPASS from TIME mode.
Changes modes from TIME mode.
Accesses BAROMETER and adjusts units/values.
Accesses ALTIMETER and adjusts units/values.
Press and hold Light button for 5 seconds to enter setting mode.
Select nearest city and toggle Day Light Savings (DST) on or off.
Adjust seconds, hours, minutes, year, and month.
Set the day and choose between 12H or 24H clock format.
Adjust the screen contrast using Barometer and Altimeter buttons.
Press Light to exit or Mode to restart; auto-exit after inactivity.
Activate/deactivate hourly chime; cycle through 5 alarms (daily and specific dates).
Enter setting mode, adjust hours and minutes for the daily alarm.
Use Barometer button to activate/deactivate alarms and SNZ feature.
Set month, day, hours, and minutes for specific date alarms.
Guidelines for setting alarms to ring daily or on specific days each month.
Enter mode, use Barometer to start/stop, Altimeter records laps.
Hold Light to view laps; use Altimeter to reset the stopwatch.
Set hours, minutes, seconds; choose countdown/repeat or countdown/countup.
Use Barometer to start/stop; Altimeter to reset the countdown.
Enter mode, select from 28 cities, adjust DST for selected city.
Access mode for weather forecast, temperature, and air pressure.
Change display units and explore calibration modes (TEMP, FDEF, AIRP).
Adjust temperature using buttons in TEMP mode.
Access FDEF mode to adjust factory defaults; select YES or NO.
Enter AIRP mode to input local air pressure for calibration.
Adjust air pressure values and return to Time mode.
Access mode for altitude and temperature; factory settings need adjustment.
Change display units and explore 5 calibration modes.
Adjust temperature in TEMP mode for altitude readings.
Set altitude to zero for tracking height gained or lost.
Adjust current altitude values in ALTI mode.
Adjust altitude values and exit.
Enter AIRP mode to input local air pressure for altitude calibration.
Access FDEF for altitude, select YES or NO. Vestal suggests NO.
Access mode for direction; adjust for declination.
Adjust compass for declination by choosing East/West and degrees.
Guide to aligning northern direction using an external compass.
Use IDLE mode for auto correction if no external compass is available.
Enter IDLE mode, hold watch level, rotate twice.
Details timeouts, measurement intervals, and range indicators (HI/Lo).
Explains weather prediction via air pressure and altitude measurement based on air pressure.
Discusses magnetic north, interference sources, and preservation tips.
Guidance on wearing the watch for height and removing it for air temperature.
Details the 3-year warranty, covered defects, and exclusions.
Instructions for obtaining an RA number and returning the product for service.
To Next Page
General
