EasyManuals Logo

Vestal Guide User Manual

Vestal Guide
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
NOTES
After entering the compass measurement mode, the measure-
ment will stop after 30 seconds. In the last 30 seconds, it will
lock up and exit this mode, and then return back to time mode.
After entering air pressure, temperature and weather forecast-
ing measurement mode, it will measure once every second.
And it will return back to time mode if without keystroke
operation for 1 minute.
Entering height and temperature measurement mode, it will
measure data once every 5 seconds within rst 3 minutes, and
measure once every 2 minutes after the rst 3 minutes. It will
not exit this mode.
In correction mode, press B key to exit. If displaying “ER-
ROR”, which means correction error. If displaying “DONE”,
which means that the correction is correct.
In setting mode, the set item will blink every 1HZ. It will exit
the setting mode if no keystroke operation within 1 minute.
When above the measurement range, HI will display. When
under the measurement range, Lo will display.
Weather forecast measurement method: estimate the weather
every hour (estimate the weather according to the air pressure
diversication within the former 4 hours). If air pressure value

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vestal Guide and is the answer not in the manual?

Vestal Guide Specifications

General IconGeneral
BrandVestal
ModelGuide
CategoryWatch
LanguageEnglish

Related product manuals