Vestal Guide - Temperature Adjustment for Altitude; Relative Height Setting; Altitude Input (ALTI)

18
ALTIMETER continued
- Press Mode button to jump to the degrees display.
- Use the Barometer and Altimeter buttons to increase and
decrease the selected number.
- Press Mode to advance.
- Repeat until the correct temperature is displayed.
- Press the Light button to exit.
- NOTE: Vestal suggests not adjusting this at rst.
RELATIVE HEIGHT:
- Press and hold the Light button.
- Press Mode button 1 time.
- ZERO: Relative height (sets your Altitude to zero. Allows
you to see the height you have gained or loss from a certain
location).
- Press Barometer or Altimeter buttons to adjust.
- Select either YES or NO.
- Press the Light button to exit.
ALTITUDE INPUT:
- Press and hold the Light button.
- Press Mode button 2 times.
- ALTI: This mode will allow you to adjust your current
Altitude.
- Press the Barometer or Altimeter buttons to begin adjusting
the temperature.
- Press Mode to jump to the Altitude input.