Vestal Guide - Temperature Adjustment; Factory Default Setting (FDEF); Air Pressure Input (AIRP)

15
BAROMETER continued
- Press Mode to jump to the degrees display.
- Use the Barometer and Altimeter buttons to increase and
decrease the selected number.
- Press Mode to advance.
- Repeat until you have your Temperature inputted.
- Press the light button to exit.
FACTORY DEFAULT ADJUST:
- Press and hold the Light button
- Press Mode button 1 time.
- FDEF: this is the factory default setting
- Press Barometer or Altimeter buttons to adjust
- Select either YES or NO
- NOTE: Vestal suggests selecting NO to turn this setting off.
- Press the Light button to exit.
AIR PRESSURE INPUT:
- Look up your local weather to nd out the current Air Pres-
sure in your location.
- Press and hold the Light button.
- Press Mode button 2 times.
- AIRP: This is the Air Pressure input mode.
- Press Barometer or Altimeter button to start inputting your
location’s air pressure.
- Use the Barometer or Altimeter buttons to increase or
decrease the selected number.
- Press Mode to advance.