11
EDITING
AB FUNCTION
The HDR-V8 uses A and B points to perform all edit functions like COPY, MOVE, and DELETE. Also for AB
Repeat, AB Single, and AB Auto Punch In/Out.
SETTING A &
B POINTS
1. Use
PLAY, FF,
REW, SHUTTLE and STOP to arrive at the position where the A or B point is required. Shuttle acts as
tape scrub.
2. Press ENTER button.
A, B and EXIT LED’s start blinking.
3. Set the current location to A or B by pressing A or B button.
TechTip
The A locate position must be BEFORE the B locate position for proper playback.
Lining up the A & B Points for deletes, etc , can be maximized by stopping at or near the
desired location and then using the SHUTTLE function to dial in as exact as possible before
creating A points or B points.
To Next Page
Loading...