Vestil MRR Series User Manual

rev. 7/12/2016
MRR & MPR Series.docx
Copyright 2016 Vestil Manufacturing Corp. Page 1 of 7
VESTIL MANUFACTURING CORP.
2999 North Wayne Street, P.O. Box 507, Angola, IN
46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
MRR- SERIES & MPR SERIES, MULTIPURPOSE RAMPS
INSTRUCTION MANUAL
MPR-2410
MPR-2313-G
MRR-2310
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.
Notes:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is
used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) the
instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil responsible for
any consequential damages sustained as a result of failing to exercise sound judgment while assembling, installing,
using or maintaining this product.
Table of Contents
Hazard identification: explanation of signal words…………………………………………………...……………..…….
2
Safety Guidelines……………………………………………………………………………………………………….........
2
Operation…………………………………………………………………………………………………...……….…………
3
Inspections & Maintenance………………………………………………………………………………………………….
6
Limited warranty…………………………………………………………………………………………………...…..……..
7

Vestil MRR Series Specifications

General

Brand	Vestil
Model	MRR Series
Category	Lifting Systems
Language	English

Summary

Receiving and Initial Inspection

Safety and Hazard Communication

Hazard Identification

Explanation of signal words (DANGER, WARNING, CAUTION, NOTICE) used to convey hazard severity.

General Safety Guidelines

Essential safety rules to prevent injury and product damage during use.

Product Operation and Application

Ramp Application

Correct positioning of ramps for curbs/steps to ensure stability and prevent accidents.

Bridge Application

Guidelines for using bridges safely, respecting load limits and clearances.

Product Specifications and Diagrams

MPR Series Specifications

Details for MPR-2310-G and MPR-2313-G models, including diagrams.

MPR & MRR Series Specifications

Details for MPR-2410 and MRR-2310 models, including diagrams.

Inspections and Maintenance

Limited Warranty

Warranty Claim Process

How to submit a claim, including required documentation and contact methods.

Warranty Terms and Conditions

Details on covered defects, warranty period, and actions that void the warranty.