400202.01 7
vetus®Installation manual VF4 VF5
11 Check the integrity of electrolytic zincs.
12 Verify and if is necessary grease: starter pinion, turbocharger leverages mechanical propulsion couplings.
13 Start the engine and run at minimum speed for few minutes.
14 If no anomalies bring the engine to its operating temperature, 70 - 80 °C (158 - 176 °F). Verify that there is
no air in the coolant circuit – bleed the air from coolant circuit if necessary.
15 Turn off the engine and check again the engine oil level and coolant level.
16 Verify for tightening.
To Next Page
