1.Frequently check the condition of the product.
2.Do not use damaged products.
3.Make sure all components are in good condition. If the product or hook
becomes damaged through accident, or if any other
type of damage is noted, they should be replaced.
4.If the wire rope has become worn or is beginning to show signs of
strands breaking it must be replaced before being used again.
5.keep the wire ropes and hooks from contaminants invasion. Use a clean
towel to clean up dirt.
6.Carbon brush will wear for a long time. Please find a professional to
replace.
7.Place the product in a dry, clean and protected environment.
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices.
To Next Page
Loading...
