2. Prior to fir st use
1. Place the device upright on a solid, level, and moisture-resistant surface.
Keep the device away at least 10cm from walls for best results.
2. To ensure optimum performance of the device, please ensure that the
air inlets and air outlets are not covered.
3. Inspect the power cord to ensure that it is not damaged.
4. Lift the upper housing from the bottom housing.
5. Remove the packaging from the wick filter and insert the wick filter into
the bottom housing
.
6. Place the upper housing back on the lower housing and ensure it is
placed securely and correctly.
7. Fill water from the opening and ensure water level not exceeding the MAX
mark.
8. Connect the power cord to a power outlet.
3. Daily use and operation
To Next Page
Loading...