4. Cleaning and care
Proceed as follows to cle an the device:
1. Turn the device off and disconnect the power plug.
2. Lift the upper main body and float from the bottom housing.
3. Remove the wick filter.
4. Rinse the bottom housing with warm water and a soft cloth.
5. Place the upper main body and float back on the lower housing and ensure that
it is placed securely and correctly.
Cleaning the housing
Clean the housing of humidifier with a slightly damp cloth.
Useful cleani ng information:
Use a solution of 50:50 vinegar and water or a 3:1 solution of vinegar essence and
water. Do not use abrasive or corrosive cleaners.
Daily maint enance
Fill bottom housing with clean water. Clean the bottom housing with warm water
and a soft cloth once every 1 to 2 day.
5. Replacing the wick filter
Use only original supplied wick filter! Proceed as follows to change the wick filter:
1. Turn the device off and disconnect the power plug.
2. Lift the upper main body and float fr
om the bottom housing (1.1).
3. Remove the wick filter (1.2).
4. Insert the new wick filter.
5. Place the upper main body and float back on the lower housing and ensure that
it is placed securely and correctly.
6. Transport and storage
ransport
ARNING!
Always switch the device off before trans- porting it. Always disconnect the power