Ⅵ. MAINTENANCE
1.Regular maintenance is needed each year. Please power off and unplug before
maintaining.
2.Please DO NOT use chemicals such as gasoline, benzene and diluent to wipe the chiller.
3.Control panel and motor must be kept dry. If water or any liquid is found on the chiller,
please turn off the power immediately and wipe it off with cloth before restarting.
4.DO NOT operate the chiller if it has a damaged cord or plug, or it is malfunctioning or has
been dropped or damaged in any manner.
5.DO NOT attempt to service this unit yourself as opening or removing covers may expose
you to dangers or other hazards. Refer servicing to qualified service personnel for service
or replacing all electrical parts.
6.If the chiller is not in use for a long time, please unplug the power cord, fully discharge the
residual water in the tubes, clean the inlet/outlet and hoses and dry them thoroughly. Put
the chiller away at a safe dry place.
To Next Page
Loading...
