1. Push and place gently when carrying with inclination not exceeding 45
degrees.
2. The product should be placed in the area which is ventilated, cool, dry,
kept away from heat and dust. Direct sun exposure should be avoided in
case of affecting refrigeration effect and the ground should be even and
firm. Distance of the cabinet’s periphery from walls and other objects
should be no less than 10 cm in order to ensure good radiating of
condenser. The showcase should be put in specified area in order to
prevent displacement due to external force
3. The showcase should be operating for a period of time to confirm the
refrigeration system in normal condition before use at each time. After the
temperature inside is reduced to normal one, food can be put into
refrigeration tray for refrigeration.
4. Do not put too much over hot food in the showcase’s surface in case of
generating over charge instantaneously.
5. For long-term discontinuation, take internal and external cleaning well
for the product. Then dry and place it in dry, cool ventilated place, and
frequently check to beware the rats. When restarting the equipment, strictly
check the electrical lines to see that whether be bit and damaged by the
rats. After strict inspection and making sure, the equipment can be
restarted to use.
6. Non-professionals shall not randomly open and replace members,
electrical elements in the freezer and refrigeration units.
7. Ask professional maintenance personnel to replace damaged power line
to avoid danger.
8. If you cannot repair the failure by yourself, please ask for professional
personnel to work out in a timely manner, or inform our technical personnel
to repair the failure.
Ⅳ. Common Faults and Troubleshooting
If you think the product has troubles, just check and do troubleshooting as
per following form. If still fails, please contact our company or sales
To Next Page
Loading...
