Ⅴ. Non-faults
1.When the compressor operates, the surface will be hot. In normal
compressor operation, the surface temperature will be high. This is normal
phenomenon. Do not touch with hands.
2.There is moisture condensation on the glass surface. With high
environment temperature and humidity, it is easy for dewdrop to appear on
the external surface of the glass. Please wipe it dry timely using soft dry
cloth or start heating wire demisting function.
3.The room temperature is lower than the controlling temperature of the
temperature controller so that the compressor breaks down. Because the
room temperature is lower than the temperature of the temperature
controller, so the data collected by the temperature sensor is not enough to
start the compressor.
Ⅵ Electrical schematic diagrams
To Next Page
Loading...
