To Next PageTo Next Page
Need help?Do you have a question about the VEVOR EH-1350 and is the answer not in the manual?
Visual guide to operating the different control panels and their buttons for various product models.
Detailed explanation of the purpose and operation of various control buttons on the cutting plotter.
Step-by-step instructions for correctly loading vinyl material onto the cutting plotter rollers.
Guide on how to change the cutting position and set the origin point for a new design.
Details on connecting the cutter via serial or USB cables for communication with the computer.
Initial steps to establish communication between the software and the cutting plotter.
Configuring connection settings, selecting machine model, and choosing the port type.
Visual guide to operating the different control panels and their buttons for various product models.
Detailed explanation of the purpose and operation of various control buttons on the cutting plotter.
Step-by-step instructions for correctly loading vinyl material onto the cutting plotter rollers.
Guide on how to change the cutting position and set the origin point for a new design.
Details on connecting the cutter via serial or USB cables for communication with the computer.
Initial steps to establish communication between the software and the cutting plotter.
Configuring connection settings, selecting machine model, and choosing the port type.
General| Model | EH-1350 |
|---|---|
| Category | Cutter |
| Max. Cutting Width | 1350 mm |
| Frequency | 50/60 Hz |
| Max. Feed Width | 1350 mm |
| Cutting Force | 500 g |
| Cutting Speed | 800 mm/s |
| Interface | USB & Serial |
| Power Supply | AC 110-220V |
| Repetition Accuracy | ±0.01 mm |
| Voltage | 110/220V |
| Weight | 66.14 lbs / 30 kg |
