To Next PageTo Next Page
Need help?Do you have a question about the VEVOR KI-870 and is the answer not in the manual?
General| Model | KI-870 |
|---|---|
| Category | Cutter |
| Max. Paper Width | 870 mm |
| Pressure | 10-500 g |
| Cutting Speed | 10-800 mm/s |
| Power Source | Electric |
| Max. Cutting Width | 780 mm |
| Power Supply | AC |
| Language | DMPL/HPGL |
Comprehensive safety instructions covering electrical hazards, operational safety, and equipment handling to prevent accidents and damage.
Important tips and warnings regarding safe handling of the blade during replacement to avoid injury.
Setting the origin point, considering starting location, and performing final setting adjustments before cutting.
Information on installing the bundled SignMaster software and its automatic driver installation.
Procedure for entering the PSN code and accepting the license agreement to proceed.
Choosing the cutter model for driver installation and selecting additional tasks like shortcuts.
Confirmation message indicating successful installation of SignMaster software.
Steps to activate the software license by entering email and confirming activation.
Opening software, selecting content, and sending it to the cutting plotter via the cutter icon.
Navigating to the cutter properties dialog to configure machine settings.
Clicking 'Connection', selecting the machine model, and choosing the connection method (e.g., USB).
Troubleshooting steps for product not connecting to software, focusing on port settings.
Resolving cutting process stoppages by using direct data lines instead of conversion connectors.
