VEVOR KH-375 User Manual

1
Contents
Ⅰ.Precautions…………………………………………………............................2
Ⅱ. Introduction for main parts………………............................…....3-6
Ⅲ. Technical parameters………….…..............................................7-8
Ⅳ
. Bracket assembly diagram……..…………..............................….9-12
Ⅴ
.Blade assembly……...............................................................13-15
Ⅵ
.
How to use the product
…......................................................16-23
Ⅶ.How to connect products to software............................................24
Ⅷ. Software and driver installation…........................................25-30
Ⅸ. Connection of software and machine…...............................31-34
Ⅹ.Troubleshooting..................................................................35-37

VEVOR KH-375 Specifications

General

Brand	VEVOR
Model	KH-375
Category	Cutter
Language	English

Summary

Safety Precautions

Product Main Parts Introduction

KH Model Parts Overview

Identifies the main parts of the KH model using diagrams and labels.

KI Model Parts Overview

Identifies the main parts of the KI model using diagrams and labels.

EH Model Parts Overview

Identifies the main parts of the EH model using diagrams and labels.

SK Model Parts Overview

Identifies the main parts of the SK model using diagrams and labels.

Technical Specifications

Included Accessories

Bracket Assembly Instructions

Iron Bracket Assembly

Diagram illustrating the assembly of the iron bracket.

Aluminum Bracket Assembly (1-2)

Diagram illustrating the assembly of an aluminum bracket (version 1-2).

Sheet Metal Bracket Assembly

Diagram illustrating the assembly of the sheet metal bracket.

Aluminum Bracket Assembly (1-4)

Diagram illustrating the assembly of another aluminum bracket (version 1-4).

Mounting Machine on Bracket

Instructions for installing the cutting machine onto the assembled bracket.

Blade Installation Guide

Operating the Cutter

KI Model Control Panel

Explains the control panel functions for the KI model.

SK Model Control Panel

Explains the control panel functions for the SK model.

EH Model Control Panel

Explains the control panel functions for the EH model.

KH Model Control Panel

Explains the control panel functions for the KH model.

Using Offline Mode

Details on using offline mode for repositioning material and blade.

Software Connection Guide

Connecting via Serial or USB

Details on connecting the cutter to a PC using different cable types.

Vinyl Master Software Installation

Steps to install the bundled SignMaster software.

Software and Driver Setup

Accessing Software Media

Instructions for accessing the software installation disk.

Starting Software Installation

Guide to starting the software installation from the optical drive.

Language, PSN, and License Setup

Steps for language selection, PSN entry, and license acceptance.

Installation Path and Unit Configuration

Choosing the installation folder and measurement units for the software.

Machine Model and Task Selection

Choosing the cutter model and optional installation tasks.

Software Activation Steps

Steps to complete installation and activate the software.

Connecting Software to Machine

Software to Plotter Communication

Steps to open the software and initiate sending content to the plotter.

Cutter Properties and Port Selection

Accessing properties, selecting the cutter, and choosing the connection port.

Finalizing Connection and Cutting

Completing the connection setup and starting the cutting process.

Troubleshooting Common Issues

Software Loading Without CD Drive

Solution for computers lacking a CD drive for software installation.

Connection Issues Troubleshooting

Troubleshooting steps for connection issues between the product and software.

Paper Deviation Correction

Adjusting paper press tension to fix deviation problems.

Small Graphics Cutting Optimization

Adjusting software compensation and speed for small graphics.

Disabling Automatic Paper Feeding

Disabling automatic paper feeding to resolve repeated cutting issues.

Direct Data Line Connection

Advice on using a direct data line to prevent cutting process interruptions.