VEVOR KH-720 User Manual

1
Contents
Ⅰ.Precautions…………………………………………………............................2
Ⅱ. Introduction for main parts………………............................…....3-6
Ⅲ. Technical parameters………….…..............................................7-8
Ⅳ
. Bracket assembly diagram……..…………..............................….9-12
Ⅴ
.Blade assembly……...............................................................13-15
Ⅵ
.
How to use the product
…......................................................16-23
Ⅶ.How to connect products to software............................................24
Ⅷ. Software and driver installation…........................................25-30
Ⅸ. Connection of software and machine…...............................31-34
Ⅹ.Troubleshooting..................................................................35-37

VEVOR KH-720 Specifications

General

Brand	VEVOR
Model	KH-720
Category	Cutter
Language	English

Summary

Precautions

Technical Parameters

Bracket Assembly Diagrams

Iron Bracket Assembly Diagram

Aluminum Bracket Assembly Diagram (1-2)

Sheet Metal Bracket Assembly Diagram

Aluminum Bracket Assembly Diagram (1-4)

Install Machine on Bracket

Instructions on how to mount the cutting plotter onto the assembled bracket.

Using the Cutting Product

Offline Mode Explanation

Loading the Media Roll

Step-by-step guide on placing and securing a media roll onto the cutting plotter.

Securing the Media Roll

Instructions on engaging the pinch rollers and ensuring the media is properly positioned.

Setting the Cut Starting Position

Guide on using offline mode and arrow keys to adjust vinyl and blade positions for cutting.

Confirming the Origin Point

Pressing the Origin button to set the starting point for the cut and tips for placement.

Connecting Cutter to Software

Connecting via Serial Cable

Connecting via USB Cable

Installing Vinyl Master Software

Information on the bundled SignMaster software and automatic driver installation.

Software and Driver Installation Process

Software Activation Prompt

Activating Software License

Steps to activate the software by entering email and confirming activation status.

Troubleshooting Common Issues

No CD Drive / Software Loading Issue

Solution for computers without CD drives, directing to USB flash drive or download link.

Product Cannot Connect to Software

Troubleshooting steps for connection issues, focusing on software port settings.

Paper Deviation During Cutting

Solution for paper deviation by adjusting paper press tension and yellow copper nuts.

Suboptimal Small Graphics Cutting

Adjusting software compensation and speed settings for ideal small graphic cutting.

Repeated Cutting / Paper Feeding Issues

Canceling automatic paper feeding function in software to resolve repeated cutting problems.

Cutting Process Stops Unexpectedly

Solution for cutting process interruption by using direct data cable connection.