To Next PageTo Next Page
Need help?Do you have a question about the VEVOR KI-1350 and is the answer not in the manual?
Diagram and hardware for assembling the iron cutting plotter bracket.
Exploded view and component list for assembling the first type of aluminum bracket.
Detailed diagram for assembling the sheet metal stand component for the plotter.
Assembly diagram for a second type of aluminum bracket using self-tapping screws.
Step-by-step guide on how to securely install the cutting plotter onto its assembled stand.
Resets the cutter and sets the carriage origin to its rightmost position.
Manages offline mode or exits it, resuming previous cutting operations.
Accesses the setup mode; has no function in this specific context.
Performs test cuts to verify material settings and optimize speed/force.
Tests Z-axis or sets a new cutting origin point in offline mode.
Controls cutting speed, with a default of 300 mm/s recommended for most tasks.
Adjusts cutting force, with 100g suggested as a starting point for material testing.
Guide to installing the bundled SignMaster software, including automatic driver setup.
Solutions for computers without CD drives, including software download links.
Resolving connection problems by verifying software port settings and configuration.
Correcting paper feed issues by ensuring consistent tension on paper press adjustment nuts.
Improving small graphic cut quality by adjusting software compensation and speed parameters.
Solutions for recurring cutting problems, such as disabling automatic paper feeding.
Preventing process interruptions and data loss by using direct data line connections.
Diagram and hardware for assembling the iron cutting plotter bracket.
Exploded view and component list for assembling the first type of aluminum bracket.
Detailed diagram for assembling the sheet metal stand component for the plotter.
Assembly diagram for a second type of aluminum bracket using self-tapping screws.
Step-by-step guide on how to securely install the cutting plotter onto its assembled stand.
Resets the cutter and sets the carriage origin to its rightmost position.
Manages offline mode or exits it, resuming previous cutting operations.
Accesses the setup mode; has no function in this specific context.
Performs test cuts to verify material settings and optimize speed/force.
Tests Z-axis or sets a new cutting origin point in offline mode.
Controls cutting speed, with a default of 300 mm/s recommended for most tasks.
Adjusts cutting force, with 100g suggested as a starting point for material testing.
Guide to installing the bundled SignMaster software, including automatic driver setup.
Solutions for computers without CD drives, including software download links.
Resolving connection problems by verifying software port settings and configuration.
Correcting paper feed issues by ensuring consistent tension on paper press adjustment nuts.
Improving small graphic cut quality by adjusting software compensation and speed parameters.
Solutions for recurring cutting problems, such as disabling automatic paper feeding.
Preventing process interruptions and data loss by using direct data line connections.
General| Model | KI-1350 |
|---|---|
| Category | Cutter |
| Max. Paper Feed Width | 1350 mm |
| Max. Cutter Width | 1260 mm |
| Cutter Speed | 800 mm/s |
| Memory | 4 MB |
| Accuracy | 0.0004 in (0.01 mm) |
| No-Load Speed | Not applicable |
| Repeating Accuracy | 0.0004 in (0.01 mm) |
| Gross Weight | 114.6 lbs (52 kg) |
