VEVOR KI-375 User Manual

1
Contents
Ⅰ.Precautions…………………………………………………............................2
Ⅱ. Introduction for main parts………………............................…....3-6
Ⅲ. Technical parameters………….…..............................................7-8
Ⅳ
. Bracket assembly diagram……..…………..............................….9-12
Ⅴ
.Blade assembly……...............................................................13-15
Ⅵ
.
How to use the product
…......................................................16-23
Ⅶ.How to connect products to software............................................24
Ⅷ. Software and driver installation…........................................25-30
Ⅸ. Connection of software and machine…...............................31-34
Ⅹ.Troubleshooting..................................................................35-37

VEVOR KI-375 Specifications

General

Model	KI-375
Category	Cutter
Speed	10-800 mm/s
Power Source	Electric
Memory	2 MB
Interface	USB
Power Supply	220V
Voltage	110/220 V
Cutting Thickness	1 mm

Summary

Blade Assembly

How to Use the Product

Control Panel Overview

Overview of control panel buttons for different cutting machine models.

Button Functions Explained

Detailed explanation of each button's function on the control panel.

Software and Driver Installation

Software Installation Steps

Step-by-step guide for installing the SignMaster software from optical drive.

Software Activation Process

Guide on activating the SignMaster software after installation.

Connection of Software and Machine

Connecting via Software Interface

Steps to select the cutter and access properties within the software.

Establishing Direct USB Connection

Guide to selecting the correct port type for USB connection.

Finalizing Connection and Cutting

Troubleshooting