To Next PageTo Next Page
Need help?Do you have a question about the VEVOR SK-375 and is the answer not in the manual?
A comprehensive list of safety guidelines for operating the cutting plotter.
Step-by-step guide on how to install and adjust the cutting blade in the carriage.
Guidance on blade replacement intervals and adjusting the blade tip length.
Details how to loosen, place, and tighten the blade carriage using the locking knob.
Explains the main screen and buttons for KI, SK, EH, and KH models.
Describes the function of each button (Reset, Offline, Setup, Test, Origin, V+/V-, F+/F-).
Solution for computers lacking a CD drive, directing to USB or download link.
Addresses problems with connecting the product to the software, focusing on port settings.
Explains how to fix paper deviation by adjusting paper press tension.
Guide to adjusting software compensation and speed for better small graphic cuts.
How to disable automatic paper feeding to resolve repeated cutting issues.
Solution for cutting process interruptions by using direct data line connection.
A comprehensive list of safety guidelines for operating the cutting plotter.
Step-by-step guide on how to install and adjust the cutting blade in the carriage.
Guidance on blade replacement intervals and adjusting the blade tip length.
Details how to loosen, place, and tighten the blade carriage using the locking knob.
Explains the main screen and buttons for KI, SK, EH, and KH models.
Describes the function of each button (Reset, Offline, Setup, Test, Origin, V+/V-, F+/F-).
Solution for computers lacking a CD drive, directing to USB or download link.
Addresses problems with connecting the product to the software, focusing on port settings.
Explains how to fix paper deviation by adjusting paper press tension.
Guide to adjusting software compensation and speed for better small graphic cuts.
How to disable automatic paper feeding to resolve repeated cutting issues.
Solution for cutting process interruptions by using direct data line connection.
General| Model | SK-375 |
|---|---|
| LCD Display | Yes |
| Category | Cutter |
| Max. Feed Width | 375mm |
| Repositioning Accuracy | 0.01 mm |
