Plug in the power cord.
First, make sure that the specifications of the power supply to be
connected are consistent with the requirements of the nameplate, and then
insert the power cord plug (one end is connected to the lower end of the
machine, the other end is connected to the power supply).
After the power cable is plugged in, the LCD and indicator light up. In daily
use, the power cable plug can not be disconnected.
HOW TO CONNECT THE ADAPTER TO THE FAUCET
Type A:
This type of faucet is with the
external threads, after removing
the outlet nozzle of the tap.
Connect the adapter to the tap
and fasten the screw. Ensure the
washer has been inserted before
tightening.
To Next Page
Loading...