• A 3/8” soft hose will come with the machine. The 3/8” soft hose connects
the Acid Water Outlet nozzle of the adapter to the water outlet in the back
of the machine.
• And a 3/8” hard hose will come with the pre-filter set. Cut this Hose into 2
pieces according to your need. As shown in the above diagram, one piece
connects the Tap Water Outlet nozzle of the adapter and the Pre-filter Inlet.
Another piece connects the Pre-filter Outlet and the water inlet in the back
of the machine.
• If you don't use the pre-filter set, then you need to cut the soft hose into 2
pieces. One piece connects the Acid Water Outlet nozzle of the adapter to
the water Inlet in the back of the machine. The other piece connects the
Tap Water Outlet nozzle of the adapter and the water. Inlet in the back of
the machine.
This Multifunctional Water Ionizer can be used freely in different
water quality and different standards of the power supplies.
• A large 4.2-inch colorful LCD screen display, displaying more information.
• The LCD displays pH and ORP, flow rate, temperature, filter usage life
etc., helping user to select suitable water.
• Elegant and solid CDC touch control panel, brief, clear and easier to be
used by children & elderly people.
• By using high-power SMPS power supply, it is suitable for many different
power supplies in the world, safe and reliable.
• The electrolysis with the Microcomputer automatic control system can
work perfectly with the water TDS from 50 to 1000PPM.
• It has a built-in water filtering system, showing the filter life span in time,
to make sure the water quality is safe for both body health and machine life
time.
• It has the self-cleaning function, to prevent scaling and maintain the high
performance.
• Japan imported stainless steel Spouts, never rust, free to be bent to any
To Next Page
Loading...