USE SAFETY CHAIN :
1. Connect safety chains to both vehicles and the tow bar itself.
2. Attach chains to the tow bar with U-bolts and flanged locknuts.
3. Tighten each flanged locknut until U-bolt threads extend past locknut.
4. Cross two chains under the coupler and connect to the chair bracket on the
hitch or to the frame of towing vehicle allowing only enough slack to permit
turning.
1. Check bolts and safety pins regularly .
2. Do not overload.
Cross Chains
Under Coupler
Flanged Locknut
(8 Places)
Connect To Chain Bracket On Hitch
Or to Frame of Towing Vehicle
To Next Page
Loading...
