EasyManua.ls Logo

VEVOR FF-T809 - Usage Notes

VEVOR FF-T809
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 3 -
USAGE NOTES
1. Never exceed the lowest rating of any part of your towing system.
2. Use this tow bar to tow only vehicles in good condition. Do not tow vehicles
with damaged steering or surension systems.
3. Inflate the tires of the towed vehicle to the maximum pressure
recommended by the tire manufacturer.
4. Towng mirrors on both sides of towing vehicle add to safety by increasing
rear visibility and are required by state laws.
5. Allow more time for accelerating, stopping, and maneuvering. Slow down
well before sharp curves, obstacles, or lane changes and before starting down
hills.
6. If the vehicle combination sways or seems unstable, gradually slow down,
pull off the road to a safe location, and inspect all connections. Instability
increases with speed, and you may have to tow at a lower speed. Discontinue
towing if instability persists. A combination that is stable and easy to control at a
low speed may be unstable at a higher speed. Stability decreases when going
downhill. Start downhill slowly and maintain a low speed.
7. Do not make sharp turns from a complete stop.
8. Reduce speeds on rough roads.
Special Instructions for using a Pickup Truck or Van as the Towing
Vehicle:
1. Pickup or van must weigh 1-1/2 times as much as the towed vehicle. Example:
to tow 3000lb. Car, pickup, or van must weigh at least 4500 Ib.
2. If towing vehicle does not weigh enough, weight must be added to prevent a
dangerous towing combination. Instability can lead to loss of control and/or a
"jackknife" condition.
3. Some step bumpers restrict turning. Use extra caution. Turning too sharply
can damage the tow bar, the hitch ball, and the bumper.

Related product manuals