LiFePo4 battery charging
1 Firstly press the key Battery Type to select LiFePo4 , then press the key
Voltage（12v,24v）,then press the key Start to charge
2 Firstly press the key Battery Type to select LiFePo4, secondly press the
key Voltage（12v,24v）,then press the key Current , at last press the key
Start to charge
Caution: when this mode selected,please make sure your charger is
LiFePo4 battery.Please make sure your battery voltage is suitable with
selected voltage,or the charging will fail.
Lithium battery charging
1 Firstly press the key Battery Type to select Lithium battery, then press the
key Voltage（12v,24v, ) then press the key Start to charge.
2 Firstly press the key Battery Type to select Lithium battery, secondly
press the key Voltage（12v,24v）,then press the key Current ,at last press
the key Start to charge
Caution:when this mode selected,please make sure your charger is
Lithium battery.Please make sure your battery voltage is suitable with
selected voltage,or the charging will fail.
Maintain
Firstly press the key Battery Type to select lead,secondly press the key
Maintain, then press the key Voltage to select suitable voltage and at last
press the key Start to charge.The charger will be charged by light current
to make sure full current state and this mode will not damage your battery.
Desulfation:
Firstly press the key Battery Type to select lead,secondly press the key
Desulfation,and then press the key Voltage(6v,12v),at last press the key
Start to charge
Caution:when the battery ageing seriously and the capacity insufficient,you
To Next Page
Loading...
