This Chuck is 4-Jaw Self-Centering chuck utilizing the precision, simplicity
and reliability of the engineering chuck.
This Chuck is self-centering; grips internally and externally; will hold round
and square work; has a hollow center so through boring can be done from
either end; and can be run clockwise or anticlockwise.
Manufactured from,this gives the chucks a higher durability ensuring a
longer life and high quality finish which is less.
(KP2-3/4, KP96)
1.4-Jaw Self-Centering Chuck……………1pcs
2.Accessory
Wooden Screw ………………………… 1pcs
T-bar Allen Key ………………………… 1pcs
Key chuck…………………………………1pcs
Adapter ……………………………………1pcs
3. Instruction
To Next Page
