VEVOR MCS1000 User Manual

36 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Technical Support and E-Warranty Certificate www.vevor.com/support

WOOD LATHE

INSTRUCTION MANUAL

MODEL: MCS1000

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents an

estimate of savings you might benefit from buying certain tools with us compared to the major

top brands and doses not necessarily mean to cover all categories of tools offered by us. You

are kindly reminded to verify carefully when you are placing an order with us if you are

actually saving half in comparison with the top major brands.

Table of Contents

Questions and Answers:

M
Mallory HancockAug 12, 2025
What to do if the motor on my VEVOR Lathe won't start?
- H
  heathergarciaAug 13, 2025
  If the motor of your VEVOR Lathe won’t start, several factors could be at play. First, verify the power cord is properly connected. Next, examine the motor connections and switch connections to ensure they are secure. If the motor windings are burned, you will need to replace the motor. A bad switch can also prevent the motor from starting, so consider replacing the switch if other solutions don't resolve the issue.
Z
zwalshAug 21, 2025
Why is my VEVOR MCS1000 Lathe so noisy?
- M
  monica61Aug 22, 2025
  If your VEVOR Lathe is operating noisily, it could be due to several reasons. The belt tension might be incorrect, in which case you should adjust it. A loose pulley can also cause noise, so tighten it securely. Check and adjust the belt tension if it is loose. Additionally, a bad bearing can contribute to the noise, requiring bearing replacement.
J
Jacob SwansonSep 1, 2025
How to fix a tool rest or tailstock that's hard to move on a VEVOR MCS1000?
- S
  swansonpatriciaSep 1, 2025
  If the tool rest or tailstock on your VEVOR Lathe is difficult to move, it may be due to a lack of lubrication; apply light oil. Alternatively, bent bed rails could be the issue; in this case, straighten them. Also, check if the lock nut is tightened and loosen it if necessary.

VEVOR MCS1000 Specifications

General

Model	MCS1000
Power	750W
Voltage	110V
Spindle Speed	50-2500 RPM
Distance Between Centers	40 inches
Phase	Single

Related product manuals

Preview: VEVOR MX-S716G

Preview: VEVOR WM210V-L

Preview: VEVOR WL1018