VEVOR SS-PAC02A User Manual

Technical Support and E-Warranty Certificate www.vevor.com/support
PCP AIR COMPRESSOR
MODEL:SS-PAC02A/SS-PAC02B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

VEVOR SS-PAC02A Specifications

General

Brand	VEVOR
Model	SS-PAC02A
Category	Air Compressor
Language	English

Summary

Important Safeguards and Warnings

Power Options, Capacity, and Pressure Limits

Details power sources, capacity limits, and maximum charging pressure for safe operation.

FCC Compliance Information

FCC Rules and Interference Mitigation

Explains FCC compliance regulations, potential interference, and mitigation measures.

Product Specifications and Parameters

Main Operating Parts Identification

Assembly Instructions: Initial Setup

Initial Connections and Power Setup

Covers voltage check, hose connections, and AC power connection steps.

Assembly Instructions: Operation Start

Pressure Setting and Compressor Start

Details pressure setting, fan check, bleed valve, and starting the compressor.

Using DC 12V Car Battery Power

DC 12V Power Connection Procedure

Step-by-step guide for connecting and using the 12V car battery power source.

Overheating Protection and Restarting

Information on temperature limits, manual/auto shut-off, and restarting the compressor.

Routine Maintenance Overview

Routine Maintenance: Disassembly Steps 1-4

Routine Maintenance: Disassembly Steps 5-7

Routine Maintenance: Disassembly Steps 8-11

Routine Maintenance: Disassembly Steps 12-14

Routine Maintenance: Disassembly Steps 15-17

Routine Maintenance: O-ring Care and Final Check

Assembly: Piston and Column Assembly

Piston and Column Assembly Steps

Steps for setting the piston into the column metal part and related checks.

Assembly: Component Assembly and Alignment

Component Assembly and Alignment Steps

Covers setting round/square parts and aligning piston rod for proper function.

Assembly: Cylinder and Motor Mounting

Cylinder and Motor Mounting Steps

Details mounting the cylinder, motor, and condensation tube correctly.

Assembly: Wire Connections and Display Reassembly

Wire Connections and Display Reassembly Steps

Covers setting motor wires, condensation tube, and display reassembly.

Troubleshooting Guide

Error Code Explanations

Lists and explains common error codes (E0-E4) for troubleshooting device issues.