Viatom Checkme - Page 36

35
persists, mark
down the error
number and
contact with
your local
distributor.
BP calibration failed.
1. Wrong height.
2. The difference
between two
calibration is too
large.
1. Reconfirm
your height.
2. Try to keep
perfectly still and
calibrate again.
No voice during ECG and
SpO
2
measurement.
The speaker is
muted.
Unmuted the
speaker in the
Settings menu.
SpO
2
value is too low
when measured using
integrated sensor.
1. Finger pressed
too hard.
2. Finger may not
be inserted
correctly.
1. Reinsert your
finger gently and
stably.
2. Make sure
your finger is in
right position.
Temperature value is too
low.
1. The
measurement area
is covered by hair.
2. The thermometer
sensor is too far
away from your
skin.
3. The thermometer
sensor is dirty.
1. Remove hair
from the
measurement
area.
2. Keep the
sensor contact
with your skin.
3. Clean the
sensor with a
soft cloth or
cotton.