4
2. Intended Use
The Checkme series health monitor is intended to be used for measuring,
displaying, reviewing and storing of multiple physiological parameters
including ECG, pulse oxygen saturation (SpO2), pulse rate, temperature
and blood pressure variation in home or healthcare facilities environment.
ECG and Blood pressure variation is intended for use with adult.
The data and results provided by this device are for pre-check screening
purpose only and cannot be directly used for diagnostic or treatment.
2.1 About Checkme
1. Touch Screen
Use the pad of your finger to tap or slip on the touch screen. Do not
use your fingernail or any other object to tap the screen.
2. Infrared temperature sensor
3. Internal SpO2 sensor
4. LED indicator
Off: the monitor is turned off or working in Standby Mode;
Green: the monitor is turned on, and working normally; or when
the battery is fully charged;
Blue: the battery is being charged;
Red and flash: the battery is low;
5. Multi-functional connector
It connects with external SpO2 cable, ECG cable, or charging cable.
To Next Page
Loading...
