Need help?Do you have a question about the Viatom OxySmart PC-60F and is the answer not in the manual?
General| Brand | Viatom |
|---|---|
| Model | OxySmart PC-60F |
| Category | Medical Equipment |
| Language | English |
Describes the physical parts of the oximeter, including display and controls.
Specifies the purpose and application of the fingertip oximeter for measuring SpO2 and pulse rate.
Lists the key features and functionalities of the oximeter, such as SpO2, PR, Plethysmogram, and Auto on/off.
Details the transducer, wavelength, output power, display range, and measuring accuracy for SpO2.
Specifies the display range and measuring accuracy for Pulse Rate.
Defines the display range for the Perfusion Index.
Outlines the preset low and high limits for SpO2 and Pulse Rate.
Details the setting ranges and default values for SpO2 and Pulse Rate over-limit settings.
Explains how the device provides alerts for SpO2 or pulse rate values exceeding preset limits.
Specifies the type of batteries, supply voltage, and operating current for the device.
Lists the recommended operating temperature, humidity, and atmospheric pressure for the device.
Describes the accuracy of SpO2 and PR measurements under low modulation amplitude.
Addresses the impact of ambient light conditions on SpO2 measurement accuracy.
Provides the physical dimensions (length, width, height) and net weight of the oximeter.
States the type of display used in the oximeter.
Details the device's classification regarding protection against electric shock and ingress of liquid.
Provides instructions for general maintenance, including battery changes and cleaning.
Details the procedures for cleaning and disinfecting the oximeter sensor and surface.
To Next Page
