Need help?Do you have a question about the Viatom Wellue WearO2 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Brand | Viatom |
| Model | WearO2 |
| Type | Pulse Oximeter |
| Measurement Parameters | SpO2, PR |
| PR Range | 30-250 bpm |
| Connectivity | Bluetooth |
| Compatibility | iOS, Android |
| Display | OLED |
| Data Storage | Yes |
| Measurement Range (SpO2) | 70% to 100% |
| Accuracy | ±2% for SpO2 |
Wear the device on the thumb or index finger, ensuring a snug fit for accurate measurements.
Turn on the device; it will begin monitoring after a few seconds.
Remove the device to start a countdown; re-wearing the device resumes the record.
Sync data via the app after the countdown or upon the next device startup.
Enable device and phone Bluetooth, then run the app to establish connection.
Avoid pairing the device directly in the smartphone's Bluetooth settings.
Vibration triggers when SpO2 falls below threshold; stops on recovery or manual press.
Adjust vibration on/off, intensity, and threshold via App settings.
To Next Page
