VIAVAC CB4 - C 2 Technical Data

MANUAL VIAVAC-CB4 / 4.1 ( Expert section ) Art. nr. 50504 EN (01-07-2017)
__________________________________________________________________________________________
2
___________________________________________________________________________________
VIAVAC vacuum lifting BV T. + 31 348 449 660 E. info@viavac.com I. www.viavac.com
C 2 Technical data
Model number CB 4 / CB 4.1
Description Below the hook vacuum lifter.
Application Horizontal, vertical and inclined picking of rigid and non porous elements with
a flat or slightly structured surface.
The suction pad seal can compensate (when not too rough) unevenness’s up to 5mm.
Functions - 90
o
tilting mechanism.
Lifting capacity max. 800kg (depending of configuration and the active suction pads)
at -0.60 bar vacuum level.
Own weight 100kg
Dimensions 905x850x265
Power supply Battery 12V / 50Ah
Battery charger Primary 110 … 240V / Secondary 12V-4A
Vacuum pump 2x Piston pump 12V capacity each 1,5m3 per hour, max. ca -0.8 bar vacuum.
Safety features - Secondary safety device.
- Audible low vacuum warning.
- Large vacuum buffer tank which prevents a sudden vacuum loss in case of leakage or
break down of the vacuum pump.
- Vacuum indicator with red / green indication.
Service life At least 20.000 cycles, when used as intended.