Vibe Power Box Micro POWERBOX 65.4M - Mounting Guidelines; Installation Location and Airflow; Power; Speaker Connections; Connection Diagram and ISO Loom

Mounting Guidelines
Your VIBE amplier is designed with a swift installation routine in mind.
Please mount the amplier in a dry location on a solid surface.
NEVER mount the amplier upside down as this will cause the amplier to over heat and
will eventually damage the amplier.
Before xing the amplier in place please ensure that there is sufcient air ow around
the exterior of the casing, at least two inches is sufcient to allow effective cooling.
4
Power / Speaker Connections
To Headunit
Vehicle ISO Loom
NOTE : If your vehicle does not have a standard ISO connector (for example a quadlock
connector) it will be necessary to purchase a separate vehicle specic T-Harness
connector
Contact your local VIBE dealer for more information.