Vibe POWERBOX 60.2 - Mounting Guidelines; Power Connections; High Level Input

Mounting Guidelines
Your VIBE amplier is designed with a swift installation routine in mind.
Please mount the amplier in a dry location on a solid surface.
NEVER mount the amplier upside down as this will cause the amplier to over heat and
will eventually damage the amplier.
Before xing the amplier in place please ensure that there is sufcient air ow around
the exterior of the casing, at least two inches is sufcient to allow effective cooling.
4
Power Connections
Low Level Input
High Level Input
Chassis Ground
Fuse Close To Battery
NOTE : When using high level input it is not necessary to connect the remote turn on wire.
Do not connect both high level and low level input at the same time.
Remote Turn On Wire