Vibe Powerbox Micro POWERBOX 400.1M - Mounting Guidelines; Power Connections; Low Level Input; High Level Input

Mounting Guidelines
Your VIBE amplier is designed with a swift installation routine in mind.
Please mount the amplier in a dry location on a solid surface.
NEVER mount the amplier upside down as this will cause the amplier to over heat and
will eventually damage the amplier.
Before xing the amplier in place please ensure that there is sufcient air ow around
the exterior of the casing, at least two inches is sufcient to allow effective cooling.
4
Power Connections
Low Level Input
High Level Input
Chassis Ground Fuse Close To Battery
Remote Turn On Wire
NOTE : When using high level input it is not necessary to connect the remote turn on wire.