Vibe SLICK a1 - Specification

Inordertoprotectyourpurchaseandaidyour
warranteepleasefillinthefollowingformand
keepitsafeforyourfuturereference:
ModelNumber:
SerialNumber:
PurchasedFrom:
DateofPurchase:
KEEP ITSAFE
Stapleyourreceipthere:
Specification SLICK a0
RMS Power @ 13.8v DC
Power @ 4 Ohms 2 x 75 WRMS
Power @ 2 Ohms stereo 2 x 100 WRMS
Power @ 4 Ohms bridged 1 x 200 WRMS
Minimum speaker impendence 2 Ohm stereo / 4 Ohm bridged
THD Distortion 0.14%
IMD Distortion 0.14%
Frequency Response 20Hz - 20 Khz
Input Sensitivity 200 mV - 6V
Input Impendence 15K
Signal to Noise Ratio 93 dB
Channel Separation -50 dB
Remote GAIN control 0.25 v - +6V
Crossover Network
Low pass filter 45 Hz – 300 Hz
Bass Boost 0 dB - +12 Db
High pass filter 45 Hz – 300 Hz
Fuse rating 15A x 2
Size length x width x height 380mm x 245mm x 65 mm
SLICK a1
4 x 75 WRMS
4 x 100 WRMS
2 x 200 WRMS
2 Ohm stereo / 4 Ohm bridged
0.14%
0.14%
20Hz - 20 Khz
200 mV - 6V
15K
92 dB
-50 dB
0.25 v - +6V
45 Hz – 300 Hz
0 dB - +12 Db
45 Hz – 300 Hz
25A x 2
430mm x 245mm x 65 mm