Before first use
47
Tighten all bolts and nuts
Check that all the nuts and bolts are well set. Check this again after
one hour of use
• after delivery and
• after maintenance or repairs have been carried out.
Never check holes to be lined up by inserting your fingers
Use a pin for this purpose. Movement of the machine or parts may
cause severe physical injury.
Be careful that nothing gets jammed
It is easy for parts to get jammed while mounting the spreader.
Work carefully when mounting by:
• placing the machine on adequate supports,
• switching off the PTO shaft,
• releasing the pressure from the hydraulic system,
• switch the control box off,
• switching the tractor off and removing the key from the ignition,
• engaging the parking brake of the tractor,
• wearing protective clothing, such as safety gloves and shoes,
• carefully performing only the action described,
Being jammed in could cause physical injury.
To Next Page
Loading...
