Before first use
64
Hydraulic system of the
tractor
To operate the machine without accessories, the tractor must not have
hydraulic control valves.
1 or more single-acting hydraulic valves are required, depending on
the accessories selected.
Required hydraulic valves
Mounting the
coupling shaft
The coupling shaft provided is too long for most types of tractors
The coupling shaft must be cut to the correct length before connecting
it to the tractor. A coupling shaft that is too long could seriously
damage the machine and the tractor.
see the section »Checking the coupling shaft length« below, and
the below section »Shortening the coupling shaft«.
During lifting and lowering of the power lift, the coupling shaft requires
adequate space for
• sliding in and out,
• sufficient overlap between the profiled tubes when driving the
machine in the extreme operating angle of the coupling shaft.
Function Single Double
Standard spreader - -
Accessories
TrimFlow 1 -
Hydraulic border spreading plate 1 -
To Next Page
Loading...
