Safety
9
Never go below an elevated, unsecured machine
The machine or parts of the machine could accidentally fall due to
dropping oil pressure, for instance. Always place the machine on
proper supports if you have to work under the machine!
Only lift the machine at the lifting points
If a machine is being elevated, attach it only at the indicated lifting
points. Never go below an elevated machine. Allow for any possible
movements of the elevated machine, whether wanted or not.
Be careful of getting jammed or pinched
If the machine is engaged or operated intentionally or unintentionally,
you could get crushed in moving parts, which could lead to injury. Be
very alert when working in the vicinity of moving parts. Always bear in
mind that the motor or parts of the machine may have some residual
energy.
Read the user’s manual
The instruction manual contains procedures for working correctly to
ensure safe work, as well as dangers one could possibly encounter.
Comply with these procedures as described and give due consider-
ation to the safety measures in place!
Do not exceed the maximum hydraulic pressure of 200 bars
Prevent the pressure in the hydraulic system from exceeding 200
bars! Working with higher pressure may damage your machine and
result in dangerous situations.
To Next Page
Loading...
